Tecnoware FSTEL100KT, Руководство пользователя

Страница: 19 / 40

ENGLISH
ELECTRONIC STABILIZER
15
User’s manual
7.1 Load Curve
Figure 10 – Load Curve
(on the right: load curve for FSTEL35KM, FSTEL100KT, FSTEL120KT models);
on the left : Load Curve for all other models)
The Stabilizer can deliver maximum power only if the input voltage is greater than 180 Vac.
For voltages below 180 Vac the power decreases linearly with the input voltage as shown in Figure 10.
8 Maintenance
8.1 AVR Cleaning
Before starting any cleaning operation, be sure that:
1. The Stabilizer breaker is “OFF”.
2. The AC Input Voltage for the AVR has been removed.
Use only a cloth dampened with water to clean the unit.
If AVR works in an environmental unusually dusty or dirty, remove the dirty from the ventilation holes.
Before restarting the AVR be sure it is completely dry. If any liquid gets inside the AVR, do not start the unit and
contact Technical Service immediately.
8.2 Operator Safety
Whenever the AVR is not responding anymore to original characteristics, the AVR must be made non-operative and
every usage not authorised must be avoided. After it will be necessary to refer to qualified technical personnel.
Original safety characteristics might not be if, for example, the AVR has visible damage or irregular operation.