Tecnoware EVO DSP MM 1.2, Руководство пользователя

Страница: 6 / 56

ENGLISH
User’s manual 2 UPS EVO DSP MM
1 Introduction
The UPS EVO DSP MM (UPS means Uninterruptible Power Supply) is the result of constant technological research
aimed at obtaining the best performance at the lowest cost.
EVO DSP MM is an advanced ON-LINE UPS built specifically to protect your computer from any irregularities in the
AC line (for example blackouts, brownouts, over voltages, micro-interruptions), which often cause damage to
hardware and software.
All that is possible because EVO DSP MM is a Double-Conversion ON-LINE UPS.
Under normal AC line condition EVO DSP MM provides an automatic Output Voltage regulation from the Rectifier
and Inverter blocks and filters out frequently occurring electrical disturbances (high Voltage transients, spikes,
interferences, etc.), thus protecting the devices connected to its outlets. During a power failure, EVO DSP MM
continues supplying adequate AC power (with a true sine wave) to all connected devices through its internal
batteries and by its DC/AC converter (Inverter).
EVO DSP MM protects the devices from accidental overload or Inverter fault by an Automatic Bypass that directly
connects the AC Input line with its outlets.
EVO DSP MM models are factory-equipped with RS-232 and USB interfaces, which may be used for notify to a
computer a power failure or a Low Battery condition: this allows automatic data backup during an extended
blackout with the most common operating systems (Windows, Linux, Unix, etc). Thanks to Interfaces, UPS DSP MM
can communicate the several made measurements (Input/Output Voltage, batteries, absorption, Frequency, etc.),
and can also be programmed in order to start-up or shutdown automatically at fixed times.
Read this manual carefully before using the EVO DSP MM; it includes important safety
warnings and useful advices for correct use and installation.
EVO DSP MM is constantly being developed and improved: consequently, your unit may differ somewhat from the
description contained in this manual.
This manual includes the following models:
•
EVO DSP MM 1.2 (1.2 KVA)
•
EVO DSP MM 2.4 (2.4 KVA)
•
EVO DSP MM 3.6 (3.6 KVA)
In this manual EVO DSP MM will simply be referred to as UPS.
EVO DSP MM models are made from a single unit that contains the electronics parts and the batteries.
However EVO DSP MM models are predisposed to the connection with external BATTERY BOX units in order to
increase the autonomy.