1
GENERAL INFORMATION
1.5 CUSTOMER/USER RESPONSIBILITIES
1.
Make sure the work area is compliant with the safety requirements set forth in current legislation in the country where the electromagnet is used.
2.
Make sure all of the work equipment made available to the operators is compliant with the safety requirements set forth in current legislation in the
country where the lifting system is installed and used.
3.
Make sure the hydraulic power supply is compliant with what is required by the manufacturer (see technical specifications).
4.
Before installing, using, or performing maintenance on the hydraulic magnet, make sure the individuals who will carry out these operations have
read and understood the use and maintenance manual. In particular, make sure all safety requirements and requirements for correct maintenance
and safe use are thoroughly understood.
5.
Make sure the operator who will use the equipment has been adequately instructed for safe use of the equipment installed on the working vehicle
on which it will be installed without creating hazardous situations.
6.
Make sure the installation and maintenance personnel have the proper technical skills to perform those activities and are appropriately instructed.
7.
It is the user/customer's responsibility to observe and carefully follow the instructions contained in this manual in order to maximize productivity as
well as prolong the life of the equipment and especially to reduce the exposure to risk of those individuals who will use and maintain the
interchangeable equipment supplied.
Attention!
It is the customer/user's responsibility to attach the instructions contained herein with the use and maintenance
manual for the system/overall assembly and/or any safety requirements in the country where it is used and
provide the operator and maintenance technician with any additional information
.
Division: Tecnoter srl
Hyd. Magnet
LQMI
Ver. T
Page 9/38
Rev: 1.0a_En –
15/07/2018