5
USE OF THE HYDRAULIC MAGNET
5.3 OPERATION
5.3.6 EQUIPMENT AT REST
When leaving the hydraulic magnet after work, make sure that you do not leave the boom of the working vehicle over the magnet in order
to prevent any lowering of the boom due to oil leaking into the cylinders. This can exert an abnormal force on the magnet and cause
damage. Rest the magnet on the ground or on a stable surface when not in use.
5
MACHINE USE
5.3 OPERATION
5.3.7 GENERAL MALFUNCTIONS
If the hydraulic magnet does not work properly:
1
- Check the pressure outlets (presence of pressure/flow or regular pressure when magnet is operated)
2
– Check for evidence on the electronic box that suggests components inside have been burnt.
Division: Tecnoter srl
Hyd. Magnet
LQMI
Ver. T
Page 27/38
Rev: 1.0a_En –
15/07/2018