Tecnosens NCL C10, Руководство по сборке

Страница: 5 / 32

1. Introduction
1
1 I
NTRODUCTION
This assembly and use manual describes the technical data and functions of the
sensors of the NCL and NCT range, for the measurement of Free Chlorine and
Total Chlorine.
The characteristics of the different sensors are shown in Table 1 below, where
it is indicated which is the measured analyte, the measurement range, the
resolution and the type of electrical output, for the different sensors, to which
this manual can be applied.
The range of sensors for the measurement of free and total chlorine has a
structure of the type with three electrodes, two of which are covered by a
membrane cap and immersed in a gel electrolytic solution. The range allows to
measure the concentration of free/total chlorine in surfactant-free water.
These devices can be used in all those situations where the following operations
are required:
• Control and regulation of swimming pool chlorination.
• Control and regulation of the chlorination of drinking water.