TECNORD RC-DBM Скачать руководство пользователя

Страница: 23 / 23

TECNORD

RC-DBX/PCM/NBM

Use and Maintenance Manual

Page

23/23

8.4.3

System Type Setup

This parameter specifies wether the system has or not a PWM output (i.e. it is an RC-DBD or RC-DBR system). It is configurable

with one of the following values:

Setting Value

displayed

DESCRIPTION

DBD

S_0

On-off system (EVR and EV9 are neither activated nor considered in diagnostics)

DBR

S_1

PWM system (EVR and EV9 outputs are activated, diagnostics on EVR is active)

8.4.4

EV9 Mode of Operation Setup

This parameter specifies wether the safety valve labeled EV9 depends on the Emergency Stop or on the Function activation. It is

configurable with one of the following values:

Setting Value

displayed

DESCRIPTION

LEVER

9_L

EV9 output is activated when at least one function is active

E-STOP

9_E

EV9 output is activated when the E-Stop is released and safe communication takes place

8.4.5

EV49 Mode of Operation Setup

This parameter specifies wether the safety valve labeled EV49 depends on the Emergency Stop or on the Function activation. It is

configurable with one of the following values:

Setting Value

displayed

DESCRIPTION

LEVER

49L

EV49 output is activated when at least one function is active

E-STOP

49E

EV49 output is activated when the E-Stop is released and safe communication takes place

8.4.6

Analog Voltage Output Range Setup

This parameter specifies which kind of system is driven by the analog voltage outputs of an RC-DBM , RC-PCM or RC-NBM system.

Its value affects the voltage values displayed during parameters adjustments and tells the system if the output voltage must be an

absolute value or ratiometric with respect to the measured battery voltage. It is configurable with one of the following values:

Setting Value

displayed

DESCRIPTION

ML4

U_0

MLT FD4 system. Reference values are 0,9V – 2,5V – 4,1V (absolute)

ML2

U_1

MLT L2 system. Reference values are 2V – 4V – 6V (absolute)

DNF12

U_2

12V DNF system. Reference values are 3V – 6V – 9V (ratiometric)

DNF24

U_3

24V DNF system. Reference values are 6V – 12V – 18V (ratiometric)

SMD

U_4

SMD system. Reference values are 2V – 4V – 6V (absolute)

WARNINGS (as required by FCC part 15 and IC RSS-210):

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) This device must accept any interference, including interference that may cause undesired operation.

This equipment has been approved for mobile applications where the equipment should be used at distances greater than 20cm

from the human body (with the exception of hands, wrists, feet and ankles). Operation at distances less than 20cm is strictly prohibited.

In any case the message coding and elaboration ensures that no outputs are activated due to radio interferences. Outputs are

activated only when the corresponding messages are received and interpreted as correct.

Содержание RC-DBM
























Результаты поиска

Содержание RC-DBM

Отзывы:

Похожие инструкции для RC-DBM

Бренды по названию

Популярные бренды

TECNORD RC-DBM, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание RC-DBM

Отзывы:

Похожие инструкции для RC-DBM

Бренды по названию

Популярные бренды