TECNORD
RC-DBX/PCM/NBM
Use and Maintenance Manual
Page
10/23
3.8
Declaration of Installation
WARNING !
During the installation phase it is necessary to make sure that:
¾
the radio remote control and the machine work together according to the regulation currently in force and to
the safety characteristics of the machine as supplied by the manufacturer;
¾
all the functions of the radio remote control, as well as their conformity on the equipped machine have been
completely checked and tested; this includes in particular the Emergency Stop function.
TECNORD is not responsible of the remore control’s installation; the installer is therefore required to issue the
operator a Declaration of Installation that must be kept together with this manual by the operator. A template for the
declaration of Installation is shown below.
DECLARATION OF REMOTE CONTROL INSTALLATION
I, the undersigned _________________________________________________________________
born in _________________________________________ State/Province_________________ on _______________________
legally responsible for the installing Company ___________________________________________________________________
with its headquarters in ____________________________________________________________________________________
DECLARE:
1 – to have installed on _______________________
on the machine of brand __________________________________
type ________________________________________ serial number ___________________________________________
at the Company _______________________________________________________________________________________
located in (street) _____________________________ (Town/City) _____________________________________________
a Radio Remote Control System branded TECNORD
type ________________________________________ model ________________________________________________
system n° ________________________________________________________________
2 – that the installation has been carried out according to the regulations currently in force for the type of machine being
equipped and that all these regulations have been observed;
3 – that the interface between the machine and the receiver is suitable and has been properly manufactured according to the
instructions provided by the manufacturer, and that all the necessary tests have been carried out.
On this day of __________________________________ in _____________________________________________________
Signature and stamp of the Installer ______________________________________
!
