Instruction manual TECNO line
6
04/06/2019 Rev:1.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
Type of Central vacuum cleaner
Manufacturer Identifi cation
CE conformity
marking
Technical data of the electric motor
Serial Number
5 - Transforming DX version (outlet pipes
fi
tted on the right) into SX version
(outlet pipes
fi
tted on the left)
The TECNO Line vacuum cleaners are generally supplied with suction and exhaust pipes on the right
side (RIGHT version). Upon request, the system can be transformed so to have the pipe connection on
the left side (LEFT version).
To do this:
Unscrew the screws and remove
the rear fi xing plate.
1
tion motor compartment. This protection grid cannot be accessed by the operator. The operator also does
not have access to the electrically-operated parts of the appliance which are protected by a cover which
can only be removed by unscrewing the Torsen screws used to fi x the soundproofi ng dome of the housing
where the suction motors are assembled.
Every intervention on the control board and on the motors must be carried out by qualifi ed personnel only
after disconnecting the electrical power supply and by removing the electric plug from the electric socket.
4.6 Movable closure guards safety
There are no movable closure guards assembled on the appliance. Every guard assembled is consid-
ered a fi xed guard and is fastened with special screws. TECNOPLUS s.r.l. reminds you that it is abso-
lutely forbidden to replace the screws used for the design and manufacture the appliances with screws
that feature different characteristics.
TECNOPLUS s.r.l. will immediately suspend the product guarantee in case of machine tampering car-
ried out by the Customer.
5.7 Identi
fi
cation plate
The CE identifi cation plate is assembled on the side of the connection to the piping network. This should
not be removed or damaged.
....................................
.........................................................................
IP20
Model:
P/N:
S/N:
Product number
