Supplementary manual TECNO Prime
2
05/06/2019 Rev:1.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
1 - OPERATING CONFIGURATIONS
Con
fi
guration 1 cyclonic (bagless) suction
with service suction socket: the customer can choose
to assemble the service suction socket directly on one side of the appliance which allows connecting
a fl exible suction hose rather than vacuum cleaning through the piping network. With no additional
connection, the functioning of the socket is controlled by the computer of the central vacuum cleaner
through two simple buttons. This allows an easy cleaning of the areas close to the central vacuum unit.
Con
fi
guration 2 bag suction
the customer chooses to use the system with the bag suction option. In
this confi guration, the air is fi ltered through a microfi ber bag featuring high-fi ltering performance and the
system’s fi lter does not need any maintenance. With this confi guration, the connection to the standard
dust collection socket of the piping network will be closed with a lid delivered with the equipment.
Together with the unit, delivered with this instruction manual, a BI-VAC confi guration kit is supplied in
the packaging; the kit allows the operator to choose between the dust being collected directly in the dust
bin or in the special microfi ber bag. The production confi guration of the Tecno PRIME system features a
hole to be completed with the BI-VAC kit when installing the unit.
Components to be found in the kit
To be used for the
con
fi
guration
Picture
Service suction socket with fl ap closure
1
Elbow coupling to be fi xed in the hole
(bag suction dust inlet)
2
Closing cover for dust suction inlet (to
be assembled on the cyclonic suction
dust inlet)
2
Retaining-ring seal to hold the dust
bag, which replaces the conveyor cone
2
Microfi ber dust bag
2
N°4 fi xing screws
1+2
N°4 washers
1+2
N°2 gaskets
1+2
N°1 aesthetic frame for elbow
connector
