manualshive.com logo in svg

Tecnomed Italia MORPHEUS, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Tecnomed Italia MORPHEUS Скачать руководство пользователя страница 5

5

ENGLISH

1.1- WARNING LABELS 

 It indicates a dangerous situation that might result in moderate or severe/fatal injuries 

unless avoided.

  It indicates a dangerous situation that might result in moderate or mild injuries or 

damage to property unless avoided.

 This symbol indicates the possible presence of risks of contamination due to contact 

with infected biological fluids or materials.  

 This icon provides information that allows you to use the device more efficiently.

2- GENERAL WARNINGS 

• Read this manual carefully before carrying out any operation on the product, follow the 

warnings contained in it and keep it for future reference.

• This manual is intended to provide the user with instructions for correct installation and 

use of the product. 

• The product must be used in accordance with the procedures contained in the manual 

and never for purposes other than those provided for therein.

• The user is responsible for the installation, operation and maintenance of the device.
• The manual describes all product versions and optionals, therefore not all instructions are 

applicable to your product.

• The product may be equipped with additional components, which are described in this 

manual.

• The information, technical specifications, drawings contained in this publication are not 

binding. 

• Tecnomed Italia s.r.l. pursues a policy of continuous product improvement and reserves 

the right to make changes to the product or to this manual without prior notice, as long 

as said changes do not affect the safe use of the device.  

• Keep the manual within reach.
• It is also strictly forbidden any kind of reproduction or appropriation of the text and/or 

images  in  the  manual;  therefore,  some  of  the  instructions,  specifications  and  images 
contained in this manual may differ slightly from the product purchased by you. 

• All the materials contained in this manual are the property of Tecnomed Italia and/

or of the companies represented by it. The images are not binding and are given for 
explanatory purposes only.

• This manual must be delivered together with the machine in case of resale.
• The original text of this manual is in Italian.

 DANGER! It is strictly forbidden to make changes to the device. 

Tecnomed Italia s.r.l. assumes NO responsibility for personal injury and/or direct or indirect 
property damage resulting from non-compliance with this requirement.

 DANGER! Tecnomed Italia s.r.l. declines any liability, expressed or implied, and cannot 

be held liable for personal injury and/or direct or indirect property damage deriving from 

failure to comply with the instructions in this manual and/or from incorrect installation and/

or use of the device and its accessories and/or from improper and/or lack of cleaning and/

or maintenance.

Содержание MORPHEUS

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды