manualshive.com logo in svg

Tecnomed Italia MORPHEUS, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Tecnomed Italia MORPHEUS Скачать руководство пользователя страница 43

43

ENGLISH

12- DISPOSAL 

This equipment complies with the European Directive 2002/96/CE on waste electrical 
and electronic equipment (WEEE). By ensuring this product is disposed of correctly, you 
will help prevent potential negative consequences to the environment and human 
health, which could otherwise arise from improper handling of the product  at the end 

of its service life. The symbol 

 indicates that the product should not be disposed of like 

normal waste, but it should be sent to the nearest authorised waste collection centre for 
electrical and electronic equipment. Disposal must be carried out in accordance with the 
applicable environmental regulations for waste disposal. The equipment must be properly 
prepared (disinfection/sterilisation) before dismantling/disposal. For more information on 
the treatment, recovery and recycling of this product, please contact the Ecology and 
Environment Department or your local waste collection service or your dental equipment 
distributor. Illegal dumping of the product by the user entails the administrative sanctions 
stated by current legislation.

11- RELATED ITEMS 

To find all items related to this product, visit:

   

www.dentalastec.it

Содержание MORPHEUS

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды