45
Instruction and maintenance manual
ENGLISH
1.10 Behavior during emergency
situations
In the event of emergency, it is always advisable
to follow the procedures outlined in the operation
and maintenance manual of the machine on
which the system is installed.
In the event of fire, always use the extinguishing
means provided being careful not to use water to
extinguish fires on electric parts.
1.11 Improper or non permitted use
The system is not designed to be used in explo-
sive environments.
An improper use may:
• Cause injuries to personnel
• Damage the system or other equipment
• Reduce the reliability and performance of the
system
The system must always be used for the applica-
tions for which it has been designed and manu-
factured. Therefore, customers should:
• Always use suitable working parameters
• Carry out the required maintenance in accord-
ance with he instructions provided
• Use appropriate materials
• Comply with all the instructions provided
• Safely and firmly fix the system and all its
parts
• Contact TECNOMAGNETE S.p.A. in case of
doubt to determine whether a specific opera-
tion is permitted
The clamping of special materials, other than
those referred to in this manual, must be
preventively authorized in writing by the
TECNOMAGNETE S.p.A.
1.12 Nameplate
Magnetic chucks are fitted with a nameplate that
provides information on the manufacturer, in
compliance with current law requirements.
The nameplate should never be removed even if
the system is resold.
If the nameplate is damaged or has been
removed, it is necessary to contact
TECNOMAGNETE S.p.A. to order a duplicate.
Always quote the model printed on the
nameplate in all communications with
TECNOMAGNETE S.p.A.
Failure to comply with the above instructions
shall entitle TECNOMAGNETE S.p.A. to disclaim
any responsibility for injuries to personnel and
damage to equipment, making the user fully re-
sponsible before competent authorities.
