Tecnoinox PCC4E9, Руководство пользователя

Страница: 7 / 20

Part 2 Use
Turning the hot plates on
Switch the power on using the switch upstream of the appliance.
Turn knob “
A ” (pic .2) of the desired plate, until it corresponds with
the dial on the panel in the chosen position; the relevant green
luminous indicator “
B
” (pic .2) will light.
The maximum heating power is produced with the knob in position
“
∞
”, the minimum power is produced in position “ 1 ”.
When you turn the appliance on, first turn the knob to position “
∞
”;
when the maximum heating temperature for cooking is reached, turn
the knob to a lower position.
Turning the hot plates off
Turn the knob to position “ 0 ” Switch the power off using the switch upstream of the appliance.
Turning the electric oven on
The heating elements are controlled by a 4-position selector switch,
while the temperature inside the chamber is controlled by a
thermostat (60-270°C).
The selector lets you choose the most suitable type of heating using
the appropriate heating elements.
Turn the knob “ C ” (pic.2) of the heating elements' selector to one of
the on positions. The green indicator light “ E ” (pic.2) indicates that
the appliance is supplied with power.
Turn the knob " D " (pic.2) of the thermostat until you reach the desired
cooking temperature. The orange luminous indicator “ F ” (pic.2) lights
indicating that the heating elements are on.
Positions of knob C
0 Off
Top and bottom heating elements
Top heating element “Grill”
Bottom heating element
Positions of knob D
0 60C° 100C° 140C° 180C° 220C° 270C°
All the cooking must be done with the oven door closed
Turning the electric oven off
Turn the knob “ D ” to “ 0 ”. Switch the power off using the switch upstream of the appliance.
Safety Thermostat (for models PFC.. only)
The appliance is equipped with a safety thermostat that cuts off the
electric power supply in case of anomalies or overheating. To turn the appliance on again, remove the control panel unscrewing
the screws at the bottom of the same, then press button “
G ” (pic.2).
This must be done by a specialised technician.