EVO HOT - EVOK HOTK
| User and Maintenance Manual | EN
31
2.2 START UP AND USE
WARNING
Before to proceed to the switch-ON of the equipment you have to verify as follow:
•
In order to adjust operating parameters consult the information on the electrical control
board section
in the user instructions enclosed herein.
• make sure that the disconnecting switch is open, in position 0, OFF, before connecting the plug into the
power socket, then connect the plug and close the switch.
•
the first start-up operation for equipments must be performed by qualified staff.
Once the power line is connected to the Hot Display Cabinet (see previous paragraph), power the equipment
by closing the switch.
After having checked as above, it is possible to start the equipment, giving electricity from the general power
pack. Press green button in position 1, ON.
WARNING
Before loading the food on the equipments, wait that the temperature needed is the same on the
control panel.
To regulate functioning parameters please follow the instruction attached to the present manual.
3 CLEANING
All the procedures must be carried out with the stationary electrical system removing the tension
from both the refrigerated item and the condensing unit.
3.1 CLEANING OF THE HOT DISPLAY CABINET
It is necessary to keep the Hot Display Cabinet cleaned.
Any operation of cleaning must be done discon-
necting the electric power supply. Wear protective gloves when cleaning.
Do not use water to wash the external / internal part
of the Hot Display Cabinet, because you could
damage the electrical part.
Do not use hard metal tools to clean it.
To clean the equipment use only non-aggressive detergents.
Dry all parts with a cloth. The frequency
of cleaning operations varies according to the quality of the exposed product. The preservation and exposition
of goods, implies at least the complete cleaning of the exposition top once a week, in order to avoid the deve-
lopment of bacteria.
The external parts must be cleaned daily
, with non aggressive detergents in order to
keep the Hot Display Cabinet in perfect conditions.
Attention! During cleaning operations, it is high recommended to use working gloves.
ATTENTION
Keep attention to not damage heaters during cleaning operations
