Tecno-gaz STERILAIR PRO, Руководство пользователя

Страница: 40 / 132

16
ENGLISH
ROUTINE CLEANING AND MAINTENANCE
In order to maintain the performance and efficiency of the lamp germicide, it is
important to strictly comply with the maintenance program attached to the device.
Do not use water jets or sprays for cleaning,
Use a brush to remove dust build ‐ up on the air inlet and outlet vent at least every month.
Use a soft moist cloth to remove dust build ‐ up from the structure.
BEFORE EVERY INTERNAL MAINTENANCE OPERATION UNPLUG THE DEVICE!
Every 3 months (approximately 2,000 hours) replace the filter inside the air
inlet vent (Spare filter: Art. SSAA015).
To replace the filters, follow the step ‐ by ‐ step instructions:
Filter SSAA015 Filter 1ZSAA0025
1 ‐ Use the L ‐ shaped wrench (3MECL0001)
supplied for safety TORX screws and unscrew
the screw in the front
2 ‐ Remove the front part of the nozzle where the
filter is housed. ( Fig.6)
3 ‐ Replace the filter (SSAA015).
4 ‐ Replace the front part of the vent in the order
shown in Fig.6
1 ‐ Get an Allen wrench 2.5. With the machine in an
upright position, unscrew the screws and
remove the cover. (Fig. 7)
2 ‐ Replace the filter (1ZSAA0025) by positioning
the center of the filter holes with those of the
frame
3 ‐ Reposition the cover making sure that the holes
are all centered
4 ‐ Screw the lid back on.
Fig. 6
Fig. 7
FILTER: SSAA015
FILTER: 1ZSAA0025
CHIAVE: 3MECL0001