Tecno-gaz Europa B xp, Инструкция по эксплуатации

Страница: 53 / 186

53 DXBA408 Rev_14
8.3 – MANUAL LOADING OF PURE WATER TANK
In the case the water loading pump does not function, filling the tank can be done manually by the operator
using the following method:
-turn on autoclave
-twist off the top located on the front of the autoclave (fig. 5 pos.1)
-insert in this opening the hose connected to the funnel
-pour distilled water in the funnel, keeping it higher than the loading top
-add until the led of maximum level turns on (fig.6 pos.1)
-loading completed, twist on the top
FIGURE 5 FIGURE 6
Frontal view 1.2
Frontal view 1.1
pos. 1 pos. 1
8.4 – CHARACTERISTICS OF WATER TO USE
Attachments
TABLE OF QUALITATIVE LEVELS ESTABLISHED BY REGULATION DIN EN 285
CEN STANDARD DIN EN 285
Evaporation residual
≤
10 mg/l
Silicon oxidation
≤
1 mg/l
Iron
≤
0.2 mg/l
Cadmium
≤
0.005 mg/l
Lead
≤
0.05 mg/l
Residual of heavy metals such as iron,
cadmium, lead
≤
0.1 mg/l
Chloride (Cl’)
≤
2 mg/l
Phosphate (P20s)
≤
0.5 mg/l
Conductivity (at 20°C)
≤
15
µ
s/cm
PH value (grade of acidity) 5 to 7
Appearance Colorless, limpid, without deposits
Hardness (E alcaline-earth ions)
≤
0.02 mmol/l