18
•
Do not tamper with the components of the sewage treatment plant to obtain different performances than the ones
expected from the manufacturer;
•
Do not wear fluttering clothes, rings and/or chains when working near moving parts;
•
Use protective gloves and glasses:
o
During the use of chemical products (hydrogen peroxide solution 35%, or similar others).
o
During refilling of the tank for the hydrogen peroxide solution (H
2
O
2
);
o
During refilling of the tank for the flocculants solution (ECOFLOC);
o
During the replacement of the U.V. lamps;
•
Immediately replace overalls and/or clothes wet or soaked with oil or grease;
•
During work on under-voltage parts be sure to have dry hands and feet. Where necessary use isolating platforms; if
not able to carry out these operations let the qualified staff to intervene;
•
Do not try repairing operations if not in possess of the competence;
•
Keep the ECOmar S STP clean, removing oil spots and liquids;
•
Put away soaked rags in flames-proof containers;
•
Do not leave rags on the ECOmar S STP.
7.7
Danger Informations
Precautions and warnings for safety are in this manual and in the system, where many warning plates are present, be sure to
make them readable. Every damaged plate must be replaced or cleaned with a cloth.
When replacing a component with plates, be sure that the spare part too has a plate, otherwise put a new plate before installation.
Here are listed the safety labels of the system:
Fig. 7.7-1 (Safety Labels)
Where necessary, in the maintenance procedures are reported the following warnings:
PROCEDURE TO CARRY OUT WITH SYSTEM TURNED OFF.
Turn off the sewage treatment plant, and deactivate the remote management (if provided).Push the STOP SYSTEM key on the
electric box and switch off the external power supply.
Fig. 7.7-2 - (Warning tag) Fig 7.7-3 - (Individual Protection Devices-IPD)
Note:
Signs and relative writings are reported in every procedure depending on necessity. When the shutdown of the ECOmar
S STP is needed before an operation, place the “Do not operate” warning sign near the command and control panel.
In general, adopt the following precautions:
•
Do not wear big clothes or jewels that can get caught in moving and rotating parts;
•
Wear helmet, gloves and any other protection clothes/devices needed;
•
Be sure that all the protections and covers are well fixed on the moving and rotating parts;
•
Remove from the ECOmar S STP any unrelated material;
•
Remove rubbles, oil, instruments and other objects from platform, passages and steps;
•
Do not keep maintenance liquids in glass containers;
•
Discharge all liquids in an appropriate container;
•
Ensure that no liquids come out when carry out an operation. Be prepared to gather the fluid in appropriate containers
when opening a compartment or disassembling components containing fluid. Under pressure liquid can cause splashes
and liquid projections causing heavy lesions;
•
Always use a piece of cardboard or a panel to check for leak from a hole. A leak from an hole, even if little, can cause
heavy lesions;
•
Dispose the exhausted materials observing the ambient norms in force.
Содержание ECOmar 145 S
