TECNARE EXEL ACOUSTICS SL ARRAY Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 52

TECNARE EXEL ACOUSTICS SL ARRAY Series Скачать руководство пользователя страница 37

Rigging Assembly Guide

36

6. Connect the magnetic quick-locks pins to the THV21-18VR rigging point.
7. Attach a second SW-18VR to the first SW-18VR as follows:

a.  Place SW-18VR at the rigging location.
b.  Orient the front grill towards the audience or backwards.
c.  Place the second SW-18VR on first SW-18VR by aligning the four rigging

points, unpin the quick-release pins from its front and rear link slots.

d. Remove the stowed front and rear quick-release pins of guide link arms

from the first SW-18VR.

e. Move up the front and rear guide link arms of first SW-18VR to the front

and rear guide link slot of the second SW-18VR and reconect the
previously quick-release pins.

CAUTION: Do not use the SW-18VR’s middle guide links arms when flying the
loudspeaker below the THV21-18VR grid or when flying it below another SW-18VR.

Always use front and rear guide link arms when flying the SW-18VR.

8. Repeat step 7 until all SW-18VR enclosures composing the array are rigged.

Fig. 34 Linking SW-18VR to THV21-18VR

«
...
35
36
37
38
39
...
»

Содержание EXEL ACOUSTICS SL ARRAY Series





















































Отзывы:

Нет отзывов