TECNARE EXEL ACOUSTICS SL ARRAY Series, Руководство по сборке такелажа, Страница: 18 / 52

Operation Manual
17
Wide splayed angles of 9 to 15 degrees should only be used for downfill coverage, or for
steering coverage away from structures like balconies.
The rear guide links arms determines the vertical splay angle (whether stacked or flown),
as a function of the hole where the pin is attached. Rear guide links arms attach at splay angles
of 0 to 9 degrees
Stack or flown mode is determined by the position in which the guide arm is attached to
the upper cabinet.
For flying the boxes and defining the splay angle, the pin must be inserted in the sliding slot of
guide links arms whereas for stacking, the pin goes through the fixed hole of the guide links
arms. For flown, after the stack is lifted, the loudspeakers rotate on the axis of the front link
arms and the rear guide link arms slide into position as the weight of the of the loudspeakers
causes the cabinets to shift
.
Fig. 8 Rear guide link arms (A) Stack Mode (B) Flown Mode
To aid the setting of guide links arms, each hole is labelled with the splay angle between
cabinets. As the links are moved down, the splay angle increases. To fit the guide links arms
into the hole, highly resistant 10mm quick-release magnet pins are used.
To stow the rear guide links arms, move them all the way down to STOW and pin them to
the 0 degree pin position.
Fig. 9 Rear guide link label and pinning position
A
B