TECNARE EXEL ACOUSTICS SL ARRAY Series Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 52

TECNARE EXEL ACOUSTICS SL ARRAY Series Скачать руководство пользователя страница 26

Operation Manual

25

Fig. 19 CLa21 Fixed to 6 degree

6. Place another full dolly at the rigging location and direct the front face of the array

towards the audience

7. On top cabinet repeat step 4a (repeat for each one)
8. Separate the dolly platform. Remove the quick-release that join the enclosure

with the platform

9. Raise first array slightly higher than the front guide link arms of the second array,

separate de platform and place the second array beneath first array

10. Connect both front rigging points between first and second array re-insert the

magnetic quick-release pins

11. On the second array, remove the rear top quick-release pins from 0º position,

slide the angle arms with the recessed knobs so as to align with the slot of the
cabinet above and secure by re-inserting the magnetic quick-release pins

12.  Move the quick-release pins according to the desired angle.
13.  Repeat the step 5
14.  Repeat steps 6 to 13 until all CLa21 enclosures composing the array are rigged.

1. Remove the pins

2. Elevate slightly

Fig. 20 Separation and elevation of the array.

«
...
24
25
26
27
28
...
»

Содержание EXEL ACOUSTICS SL ARRAY Series





















































Отзывы:

Нет отзывов