TECNA 2P2B00, Инструкция по эксплуатации, Страница: 3 / 36

PROVASET 2P code 2P2B00 - 2P6B00 - Instruction manual
rev. 14/02/2013
page 3
Used conventions
!
CAUTION: Safety rules for the operator
%
WARNING: Instructions to be followed carefully for the correct equipment operation
and to avoid any damage

NOTE:
Contains important prescriptions for the equipment maintenance
NOTE:
Contains important supplementary information or useful suggestions
!
CAUTION:
THIS TESTER USES COMPRESSED AIR.
THE OPERATOR MUST BE PROTECTED AGAINST POSSIBLE DAMAGE CAUSED BY
THE ACCIDENTAL DETACHMENT OF PARTS UNDER PRESSURE OF THE PRODUCT
TO BE TESTED.
THE TESTED PRODUCT MUST CONFORM WITH THE BINDING REQUIREMENTS
(ex. directive "Simple pressure tanks").
General recommendations
•
The power socket needs compulsorily a ground connection.
•
Always keep the power supply cable in good conditions.
•
Clean the equipment outer housing after disconnecting the power supply cable. Use
only water with neutral detergents and soft cloths. Never use alcohol or thinners.
•
Do not pour fluids on the equipment: this could damage some of its parts permanently,
especially those under voltage.
• Use the equipment only for the intended purposes, described in this manual.
Different uses can compromise the equipment safety.
NOTE:
THIS MANUAL MUST BE READ CAREFULLY BEFORE USING THE EQUIPMENT OF WHICH IT IS
INTEGRAL PART.
PRESERVE WITH CARE.
Reserved rights
This manual is officially only handed out to the legal owner of the corresponding equipment
for conforming uses.
The copy and the distribution of any part of this manual, under any form, are forbidden
without the express consent of
tecna srl.