TecLime TDH-12, Руководство пользователя

Страница: 10 / 38

10
Directions for Use (GB)
Please read the instructions carefully before using the product and keep it for future reference.
This product is intended for household use only.
1. Specification
Model nr. TDH-12
Description Dehumidifier
Voltage / Frequency 230V AC / 50 Hz
Power rated 1,5 A
2. Safety warnings
In order to use the product more conveniently and avoid any danger caused by wrong operation,
please pay attention to the notices
。

Under no circumstances must the appliance be placed immersed in water or other liquid,
or come into contact with such. Do not use the appliance with wet or moist hands.
Should the appliance become moist or wet, remove the mains plug from the power supply
immediately.
 Before connecting of the appliance check that voltage indicated on the rating label
corresponds to the mains voltage in your home.
The electricity meter and the indoor wiring should afford the using power of the appliance,
and the user should consider the load when using other appliance in the same time.

Do not use the appliance outdoors. Use the appliance only for the intended purpose.

Always remove the plug from the power supply whenever the appliance is not in use, before
cleaning the appliance or whenever a disturbance occurs. Switch off the appliance
beforehand. Pull on the plug, not on the cord.

In order to protect children from the dangers of electrical appliance shock, never leave them
unsupervised with the appliance. When selecting the location for your appliance, do so in
such a way that children do not have access to the appliance. Take care to ensure the cord
does not hang down.

Keep the appliance and the cord away from heat and moisture.
 Never leave the appliance unsupervised. Switch off the appliance whenever you are not
using it, even if this is only for a moment.

If the function of the unit is in trouble, please send the product to maintenance centre or
after-sale service. Please don’t disassemble the unit and change the spare parts by yourself.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid a hazard.

Do not drink or use the water drained from the unit it contains contaminants and could
make you sick.
Electrical Information

The manufactures nameplate is located on the rear panel of the unit and contains electrical
and other technical data specific to this unit.

Be sure the unit is properly grounded. To minimize shock and fire hazards, proper
grounding is important. The power cord is equipped with a three-prong grounding plug for
protection against shock hazards.
Do never, under any circumstances cut, remove or bypass the grounding of the unit!

Your unit must be used in a properly grounded wall receptacle. If the wall receptacle you
intend to use is not adequately grounded or protected by a time delay fuse or circuit