![TecLime TDH-12 Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/teclime/tdh-12/tdh-12_user-manual_1071355014.webp)
14
Removing the collected water
There are two ways to remove collected water.
1. Use the bucket
When the bucket is full, the unit will automatically stop
running and display P2 , the Full indicator light will flash.
Slowly pull out the bucket. Grip the left and right handles
securely and carefully pull out straight so water does not spill.
Do not put the tank on the floor because the bottom of the
bucket is uneven. Otherwise the bucket will fall down and
cause the water to spill (see Fig.5 & 6).
Throw away the water and replace the bucket. The bucket
must be in place and securely seated for the dehumidifier to
operate.
The machine will re-start when the bucket is restored in its
correct position.
NOTES:
When you remove the bucket, do not touch any parts inside of
the unit. Doing so may damage the product.
Be sure to push the bucket gently all the way into the unit.
Banging the bucket against anything or failing to push it in
securely may cause the unit not to operate
2.
Continuous draining
Water can be automatically emptied into a floor drain by attaching the
unit with a water hose (not included).
Cut off the plastic cover located at drain hose outlet by a scissor.
Attach a water hose (ID=11.2mm) to the drain hose outlet of the
unit and lead it to the floor drain or a suitable drainage facility
(see Fig.7). The drainage facility should be lower than the drain
outlet of the unit.
Make sure the connection of the water hose
and the drain hose outlet is tight and do not
let the water leak.
Be sure to run the water hose sloping
downward and let the water to flow out
smoothly. Do not install the water hose as
shown Fig.8a and Fig.8b.
NOTE: When the continuous drain feature is not
being used, remove the drain hose from the
outlet.
5. Care and cleaning of the dehumidifier
Turn the dehumidifier off and remove the plug from the wall outlet before cleaning.
1. Clean the Grille and Case
Use water and a mild detergent. Do not use bleach or abrasives.
Do not splash water directly onto the main unit. Doing so may cause an electrical shock,
cause the insulation to deteriorate, or cause the unit to rust.
The air intake and outlet grilles get soiled easily, so use a vacuum attachment or brush to
clean.