User's manual for
Explanation of symbols used in the manual:
- This symbol denotes especially important guidelines concerning the installation and
operation of the device. Not complying with the guidelines denoted by this symbol
may cause an accident, damage or equipment destruction.
IF THE DEVICE IS NOT USED ACCORDING TO THE MANUAL THE USER IS
RESPONSIBLE FOR POSSIBLE DAMAGES.
1.
SAFETY NOTES
Prior to commissioning the system read the operating instructions
thoroughly. Instructions contain important information on installation, use,
and safety of the device. Failure to follow the instructions can lead to
serious injuries or damage to the property may occur if the respective
precautions are not taken.
WARNING:
-
Only qualified staff should work on this device or in its vicinity. The staff must
thoroughly be informed about all warnings and maintenance measures
according to this operating instruction.
-
To ensure the correct and safe operation of this device, proper transport,
storage and assembly as well proper operation and professional maintenance is
required.
- TechWind disclaims
responsibility for property damage or personal injuries
resulting from installation or operation of the equipment by unprofessional or
untrained personnel or improper use thereof.
installation may case serious body injuries or property damage.
- TechWind reserves the right to modify the product to improve its functionality
and quality. Always check if the version of the manual used by your or your
personnel corresponds to the version of controller being installed or operated.
-
Checking for visible signs of the transportation-related damage is mandatory
before installation.
-
Any unauthorised modification of hardware or software of the controller is not
permitted.
- Do not
power the unit from power sources of different ratings than described in
the following chapters of this manual.
- It is mandatory to power down the whole unit prior to the controller installation.
- The entire wiring should be done and checked by the qualified installers with
the valid certification according to the electrical regulations.
4
