TechWind SDK-500, Руководство пользователя

Страница: 32 / 36

User's manual for elevator door controller SDK-500
Register Write Range Register description
0x0210 No - Door width in pulses, high byte
0x0211 No - Door width in pulses, low byte
0x0212 No 200 ÷ 3999 „
Width ” parameter in „ Doors data ” menu, in [mm]
0x0213 No 10 ÷ 399 „ Weight ” parameter in „ Doors data ” menu, in [kg]
0x0214 No 0 ÷ 79
„ V opening ” parameter in „ Speeds ” menu, in [cm/s]
0x0215 No 0 ÷ 79 „ V closing ” parameter in „ Speeds ” menu, in [cm/s]
0x0216 No 50 ÷ 999
„ Init. speed ” parameter in „ Calibration ” menu, in [0.1%]
0x0217 No - Acceleration/deceleration speed of door opening
0x0218 No - Acceleration/deceleration speed of door closing
0x0219 No - Start point of deceleration while opening in [mm]
0x021A No - Start point of deceleration while closing in [mm]
0x021B No 0 ÷ 299 „ Lock zone ” parameter in „ Calibration ” menu, in [mm]
0x021C No 0 ÷ 1
„ OPENING inp. ” parameter in „ Inputs ” menu:
0 – inactive; 1 - active;
0x021D No 0 ÷ 1
„ CLOSING inp. ” parameter in „ Inputs ” menu:
0 – inactive; 1 - active;
0x021E No 0 ÷ 1
„ OPEN switch ” parameter in „ Calibration ” menu:
0 – inactive; 1 - active;
0x021F No 0 ÷ 2
„ OPEN output ” parameter in „ Outputs ” menu:
0 – inactive; 1 - normal open; 2 - normal closed
0x0220 No 0 ÷ 2
„ CLOSED outp. ” parameter in „ Outputs ” menu:
0 – inactive; 1 - normal open; 2 - normal closed
0x0221 No 0 ÷ 2
„ BARRIER out. ” parameter in „ Outputs ” menu:
0 – inactive; 1 - normal open; 2 - normal closed
0x0222 No 0 ÷ 2
„ External ” parameter in „ Photocell ” menu:
0 – inactive; 1 – transfer; 2 - active
0x0227 No 0 ÷ 1
„ INSTALL inp. ” parameter in „ Inputs ” menu:
0 – inactive; 1 - active;
0x0228 No - Additional input (not used)
0x0229 No 0 ÷ 1
„ Language ” parameter in „ Region ” menu:
0 – Polish; 1 - English;
0x022A No 0 ÷ 5
„ Lock. speed ” parameter in „ Calibration ” menu:
0 – MIN.; 1 – 20% … 5 – 100%
0x022B No 0 ÷ 99 „ Force reduc. ” parameter in „ Calibration ” menu, in [%]
0x1004 Yes see desc.
Write only register , allows to door control while RS-485 mode:
0 – open, 0x100 – close,
32