TechVision DVR-LT016480, Руководство пользователя

Страница: 71 / 140

5.3.6 Alarm
o chapter 4.6 Alarm Setup and Activation.
chapter 4.5 Detect.
p includes the following items. Please select channel first. See
select corresponding PTZ protocol such as PELCOD.
oices: none/odd/even.
ton, system goes back to the
p, please refer to chapter 4.9 preset/patrol/pattern/scan.
Please refer t
5.3.7 Detect
Please refer to
5.3.8 Pan/Tilt/Zoom
The pan/tilt/zoom setu
Figure 5-24.

Protocol:

Address: input corresponding PTZ address.
 Baud rate: select baud rate.
 Data bit: select data bit.
 Stop bit: select stop bit.
 Parity: there are three ch
After completing all the setups please click save but
previous menu.
For detailed setu
Figure 5-24
5.3.9 Display
nterface is shown as below. See Figure 5-25.
value ranges from 128
 l name: Here is for you to modify channel name. Please note all your
nt
 display time or not when system is playback.
 ormation: System displays some information in the screen for your
 de: you can select from the dropdown list: self-adaptive/VGA/TV.
Display setup i
 Transparency: Here is for you to adjust transparency. The
to 255.
Channe
modification here only applies to DVR local end. You need to open web or clie
end to refresh channel name.
Time display: You can select to
 Channel display: You can select to channel name or not when system is
playback.
Overlay inf
reference.
Display mo
 Enable tour: activate tour function.
71