Technoton DUT-E S7 Скачать руководство пользователя страница 10

Страница: 10 / 81

Introduction

DUT-E S7 fuel level sensor. Operation manual. Version 4.0

Technoton, 2021

To receive the sensor indications by means of

S7 Technology

with a smartphone/tablet based

on Android 5.X and higher operating system (further on

—

Android device),

Fuel Tank Monitor

mobile application is used, its functionality enables the user to:

•

Monitor current values of:
- fuel level in the tank;
- volume of fuel in the tank;
- frequency of the sensor measuring generator;
- temperature of fuel in the tank.

•

Receive messages of recorded

Events

“

Fuelling

”

“

Fuel discharge

”

;

“

Low level of fuel in the tank

”

;

“

igh/Low temperature of fuel in the tank

”

•

Conduct the calibration of the measuring system and the fuel tank calibration.

•

Enable/disable the feature of compensation of thermal expansion/compression of fuel in
the tank.

•

Define automatically the remaining distance of the route, depending on the average fuel
consumption and the volume of fuel in the tank.

•

Sum up indications of the fuel volume of the specified group of sensors.

•

Define automatically the time left before the tank is filled during the fuelling operation.

•

Monitor the received signal strength indicator (RSSI) and the time of the latest
message reception from the sensor.

•

Monitor the current mode of the sensor operation.

•

Monitor the sensor malfunctions.

•

Receive the sensor ID data (serial number, firmware version, MAC address of
BLE-module).

•

Record (log) current values of the measuring generator frequency, fuel temperature,
fuel level in the tank.

•

Select between the metric system and the USC, to display sensor indications.

•

Conduct operations with the sensor profile.

The user may download the Fuel Tank Monitor application from

Google Play

(search request

“

Technoton

”

) and

to it with 10 days free test period.

ATTENTION:

It is strongly recommended to follow strictly the instructions of the

present Manual when using, mounting or maintaining DUT-E S7.

The Manufacturer

guarantees DUT-E S7 compliance with the requirements of technical

regulations subject to the conditions of storage, transportation and operation set out in this
Manual.

ATTENTION:

Manufacturer reserves the right to modify DUT-E S7 specifications that

do not lead to a deterioration of the consumer qualities without prior customer notice.

Содержание DUT-E S7


















































































Результаты поиска

Содержание DUT-E S7

Отзывы:

Бренды по названию

Популярные бренды

Technoton DUT-E S7, Руководство по эксплуатации

Результаты поиска

Содержание DUT-E S7

Отзывы:

Бренды по названию

Популярные бренды