CAN UP 27 installation / Creating and customizing Reports
CAN UP 27 online telematics gateway. Operation manual. Version 1.0
© Technoton, 2017
38
For each
Report
, the following settings are provided:
Allow Report
(
SPN 521151
) field is used to enable or disable generation of selected
Report;
in
Create report when Event occurs
area, there is:
-
Event SPN
(
SPN 521166
) drop-down list corresponding to
S6 database
.
From this list, you can select the Event, which generates the Report when occurs;
-
Report Name
(
SPN 521250
) field, where you should enter name of the Report to
identify it. Use letters of Latin alphabet only (to exclude conversion of encodings
during sending Reports by e-mail or via SMS) when entering the name of Report.
in the appropriate fields of
Report generation conditions
area, you can specify the
conditions for the Report to be generated depending on connection status of CAN UP to
onboard electrical power network or depending on movement of Vehicle:
- Unit is not connected to electrical network (operates on inbuilt battery)
(
SPN 521151
/12.3);
- Unit is connected to electrical network, no Vehicle movement (
SPN 521151
/12.4);
- Vehicle is moving (this setting is on continuously).
in
Report sending conditions
area (
SPN 521151
/11.1), you can enable or disable
sending Report in roaming mode;
in the corresponding fields of
Report Recipients
area, you can specify options of
sending Report:
-
AVL server
(
SPN 521154
/25.0) - for sending report via GPRS;
-
- for sending report by e-mail to selected addresses from pre-formed list of
e-mail addresses of recipients. To create an address list, use
button.
A list can contain no more than three e-mail addresses of recipients. Each address
must contain no more than 64 characters.
-
SMS
- for sending report as an SMS message to mobile phone numbers from the
generated list of recipient numbers. To create a list of numbers, use
button. The list can contain no more than three phone numbers of recipients, recorded
in international format (maximum 13 digits).
Note - If you make and save changes to the lists of e-mail addresses and/or phone
number of recipients, settings of Reports where this data is specified will automatically
update.
RECOMMENDATION:
do not choose to send by e-mail and/or via SMS the Reports,
which are generated more than once per hour.
in
Report Data (SPN)
area, you can select data from
Select SPN/PGN
(see figure 22 a) window, which will be used for Report generation. To add
SPN
use
button, to remove SPN use
button, placed near the corresponding SPN.
You can select up to 10 SPNs for one Report.
