Technosoft 2018
7
iMOT Intelligent Motors Line Technical Reference
WARNING!
DURING OPERATION THE MOTOR WILL MOVE. KEEP AWAY FROM ALL
MOVING PARTS TO AVOID INJURY.
WARNING!
IN A DOMESTIC ENVIROMENT THIS PRODUCT MAY CAUSE INTERFERENCE IN
WHICH CASE SUPPLEMENTARY MITIGATION MEASURES MAY BE REQUIRED.
1.2 Cautions
CAUTION!
THE POWER SUPPLIES CONNECTED TO THE INTELLIGENT MOTOR MUST
COMPLY WITH THE PARAMETERS SPECIFIED IN THIS DOCUMENT
CAUTION!
TROUBLESHOOTING AND SERVICING ARE PERMITTED ONLY FOR
PERSONNEL AUTHORISED BY TECHNOSOFT
CAUTION!
THE INTELLIGENT MOTOR CONTAINS ELECTROSTATICALLY SENSITIVE
COMPONENTS WHICH MAY BE DAMAGED BY INCORRECT HANDLING.
THEREFORE THE INTELLIGENT MOTOR SHALL BE REMOVED FROM ITS
ORIGINAL PACKAGE ONLY IN AN ESD PROTECTED ENVIRONMENT
To prevent electrostatic damage, avoid contact with insulating materials, such as synthetic fabrics or plastic surfaces.
In order to discharge static electricity build-up, place the intelligent motor on a grounded conductive surface and also
ground yourself.
1.3 Quality system, conformance and certifications
IQNet
and
Quality Austria
certification about the implementation and maintenance of the
Quality Management System which fulfills the requirements of Standard
ISO 9001:2015
.
Quality Austria Certificate
about the application and further development of an effective
Quality Management System
complying with the requirements of Standard
ISO 9001:2015
REACH Compliance -
TECHNOSOFT hereby confirms that this product comply with the legal
obligations regarding Article 33 of the European REACH Regulation 1907/2006 (Registration,
Evaluation, Authorization and Restriction of Chemicals), which came into force on 01.06.2007.
RoHS Compliance -
Technosoft SA here with declares that this product is manufactured in
compliance with the RoHS directive 2002/95/EC on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS)
Technosoft SA hereby declares that this product conforms to the following European
applicable directives:
2014/30/EU
Electromagnetic Compatibility (EMC) Directive
2014/35/EU
Low Voltage Directive (LVD)
93/68/EEC
CE Marking Directive
Conflict minerals statement -
Technosoft declares that the company does not purchase
3T&G (tin, tantalum, tungsten & gold) directly from mines or smelters...
We have no indication that Technosoft products contain minerals from conflict mines or
smelters in and around the DRC.
The following technical standards have been applied in the design and qualification of the iMOT family:
EN61800-3: 2004 + Amendment 1: 2011
Adjustable Speed Electrical Power Drive Systems - EMC Requirements
BDM (Basic Drive Module) / Category C3: intended for use in Second Environment
EN61800-5-1: 2007 + Amendment 1: 2016
Adjustable Speed Electrical Power Drive Systems - Safety Requirements: Electrical, Thermal and Energy
BDM (Basic Drive Module) / DVC A, Pollution Degree 2, Over-voltage Category I
EN60529: 1992 + Amendment 2: 2013
Degree of protection provided by enclosure
