Technologic Systems TS-7300 Скачать руководство пользователя страница 8

Страница: 8 / 58

TS-7300 MANUAL

INTRODUCTION

✔

55 DIO ports (up to 35

TS-XDIO

capable on FPGA)

✔

1.8 watts power (CPU/SDRAM full speed, ethernets on but unplugged, all serial ports
on, and with default FPGA bitstream)

✔

Fast boot to Linux prompt-shell in 1.69 seconds, Linux-based bootloader

✔

Watchdog timer

✔

PC/104 expansion bus

✔

SPI bus interface

✔

Matrix keypad and text mode LCD support

✔

Operating Temperature Range: Fanless from -20° to +70°C

✔

Extended Temperature -40° to +85°C standard at lower CPU clock speeds

1.5 Configurability

The

TS-7300

can be configured for your application using the following available on-board

options and external accessories:

On-board Options

✔

TS-7300-yyy

: TS-7300 with up to 128 MB of on-board SDRAM. For example,

TS-7300-

selects model

TS-7300

with 64 MB of SDRAM.

✔

OP-BBRTC

: on-board sealed-battery backed RTC

✔

OP-TMPSENSE

: High-precision temperature sensor

✔

OP-485-FD

: RS-485 full duplex interface on COM2

✔

OP-485-HD

: RS-485 half duplex interface on COM2

✔

OP-ROHS

: RoHS directive compliant built board

Note

The

TS-7300

SBC can be built compliant with the RoHS (Restriction of Hazardous

Substances ) Directive. Contact Technologic Systems for RoHS support.

External Accessories

✔

SD-512

: 512 MB SD Flash Card with full ARM tool chain installed and Debian

✔

USB Flash Drive

: 256 MB with full ARM tool chain installed and Debian

✔

WIFI-G-USB:

Linux-supported USB 802.11g WiFi transceiver for wireless networking

✔

OP-LCD-LED

: Alphanumeric 2x24 LCD with back light and cable

✔

OP-KPAD:

Matrix keypad with cable

✔

PS-5VDC-REG

: Regulated 5VDC Power Supply, 110 VAC Input

✔

TS-ENC730

: Metal Enclosure with Power Converter and additional features

✔

RC-DB9

: COM2 adapter cable to DB-9

In addition, a complete set of interfacing cables, connectors, and enclosures is available.

Note

Check our website at

www.embeddedARM.com

for an updated list of options

and external accessories

Содержание TS-7300



























































Результаты поиска

Содержание TS-7300

Отзывы:

Technologic Systems TS-7300, Руководство пользователя, Страница: 8 / 58

Результаты поиска

Содержание TS-7300

Отзывы: