sensor has been installed onto the first transmitter). If this does not
happen after 2 minutes, the batteries will need to be removed from both
units and reset from step 1.
5.
Insert the batteries into the second transmitter as soon as the outdoor
temperatures from the first transmitter are displayed on the Temperature
Station.
Note:
User must insert the batteries into the second transmitter within 45
seconds of reception of the first transmitter.
6.
The outdoor temperature reading from the second transmitter will be
shown on the LCD and the Channel No. will shift back to "1", indicating
that all three channels are running successfully. If this does not happen
after 2 minutes, the batteries will need to be removed from all the units
and reset from step 1.
Note:
After the Temperature Station has successfully received the second
transmitter, Channel 3 will display the data measured by the internal sensor of
the second dual channel transmitter. Yet the probe data from the second
transmitter will not be displayed on the Temperature Station.
HOW TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE STATION
The Temperature Station uses 2 x AA, IEC LR6, 1.5V batteries. When
batteries will need to be replaced, the low battery icon will appear on the LCD.
To install and replace the batteries, please follow the steps below:
29
