TechnoKom AutoGRAPH STEALTH, Руководство по управлению

Страница: 41 / 67

AutoGRAPH- ST
– Remote Control Command
42
FASTMOVEDETECT
Command FASTMOVEDETECT
Name Quick accelerometer notification
Supported with firmware
AGST-1.32 and higher
Description Command is intended to enable quick notification when
accelerometer detects motion start or other affects.
When this option is enabled, the device will send a
notification without position data immediately after the
motion detection. When the position data becomes
available, it sends second notification with device current
position coordinates. This function provides on-time
delivery of notification to a customer.
Command format:
password FASTMOVEDETECT= status;
parameters of the command:

status
– send quick notification:
0
– disabled. In this case the device will send 1 notification about motion detection, only
after the position acquisition;
1
– enabled.
Sample command:
5672 FASTMOVEDETECT=1;
Sample reply:
FASTMOVEDETECT=1;
The device is set up to send quick notification when accelerometer triggers.