TechnoKom AutoGRAPH STEALTH, Руководство по управлению

Страница: 35 / 67

AutoGRAPH- ST
– Remote Control Command
36
DELAYOFF
Command DELAYOFF
Name Sleep mode delay
Supported with firmware
AGST-0.75 and higher
Description Command is intended to set up a delay of switching to
sleep mode. If the delay is enabled, the device will stay
in tracking mode during the delay after sending SMS
with position data. During this time a customer can send
new settings to the device via SMS.
Command format:
password DELAYOFF=delay_mode,delay_time;
parameters of the command:

delay_mode
– delay of switching to sleep mode:
0
–
disables the delay;
1
– enables the delay.

delay_time
– delay time, in minutes. Minimum value is 0, maximum value is 10.
Sample command:
5672 DELAYOFF=1,10;
Sample reply:
#DELAYOFF=1,10;
The device is set up to stay in tracking mode during 10 minutes after sending SMS.