TechnoKom AutoGRAPH STEALTH, Руководство по управлению

Страница: 45 / 67

AutoGRAPH- ST
– Remote Control Command
46
GPSEN
Command GPSEN
Name Data recording option
Supported with firmware
AGST-1.11 and higher
Description Command enables position data recording, which
means that the device will switch to the tracking mode,
acquire position and record that data in internal memory.
In this case the device doesn‟t send the obtained data to
customer. The collected data can be sent to data server
in the next data transmission period. This data is sent
only to server.
Command format:
password GPSEN=status;
parameters of the command:

status
– specify following value:
0
–
to disable data recording;
1
–
to enable data recording;
Sample command:
5672 GPSEN=1;
Sample reply:
#SECURESETUP=1;
Data collection is enabled in the device.