Technogym Wellness Expert, Руководство по техническому обслуживанию

Страница: 33 / 64

New Wellness Expert: Service & Maintenance manual - rev. 1.1
6.4. UPDATING SW
To carry out this procedure, it is necessary to order a DOS-formatted bootable USB 2.0 key, using
the code indicated in chapter 4. “Accessories”.
In event of a system lockout, this USB key can be used to restore the system by following the
procedure below.
Check the size of the USB key, if you have a 2Gb key check and update, if necessary, the
BIOS version as follows.
After completing the SW recovery procedure, it should be necessary to calibrate the
Touch screen. The procedure is detailed in paragraph 8.1. “Touch screen calibration”.
IF YOU HAVE BEEN USING A 2GB USB KEY
Be sure that the PC BIOS version is equal or greater than 1.4 .
You can check this version in two different ways:
•
Looking at the first line on the screen during the startup procedure;
•
Directly entering the BIOS by clicking on the CANC button during the startup
procedure;
In case that the BIOS version is not the one mentioned before, carry out the following
procedure:
Switch on the machine and wait until Windows has been loaded to insert the USB
key. The key will be recognised as “E” drive.
On the key, open the “BIOS” folder.
Execute the BIOSPROGRAMMER file.
From the program, use the browse button to select BIOS version file M6230000.104
(or greater M6230000.105 ecc.) you’ll find in the same BIOS folder. Then execute
it.
Do not use the PC during the BIOS updating, to avoid any data corruption.
Reboot the PC.
Page 6.9