17
Multi Hip
G
H
I
L
G
H
I
L
Assembly
To fit the
handgrips
:
- remove the packing materials attaching the handgrips onto the equipment; if using cutters, scissors or similar tools, be very careful
not to damage the rubber surface of the handgrips or the equipment;
- screw the two handgrips (
G
) into threaded holders (
I
), turning them clockwise;
- when the plastic bushing (
H
) is correctly positioned between the rubber end piece and the thread, use a 4-mm “T” spanner to
tighten grub screws (
L
) on the lower part of the threaded holder (
I
), by turning them clockwise.
