22
Multi Hip
C
D
B
A
E
Adjusting cable tension
To take up some of the slack in the weight stack cable proceed as follows:
- use an Allen key (
A
) and an open spanner (
B
);
loosen nut (
C
) securing screw (
D
) by half a turn in an anticlockwise direction;
- simultaneously turn both housings of the pulley, clockwise to tighten the cable
or anticlockwise to loosen it;
WARNING
Both housings must be turned the same distance on their respective
sides: constantly check that tabs (E) remain perfectly aligned.
- after completing the operation, tighten nut (
C
) securing screw (
D
).
