Technogym New Bike EXCITE Plus, Техническое обслуживание руководство

Страница: 76 / 237

- New Bike: Technical service guide - rev. 4.1
Page 6.2
6.1. TROUBLESHOOTING MENU: LEDMODELS
The configuration procedure for the equipment is activated when the equipment is in Stand-By and
differs according to whether you are working on 500 or 700 equipment.
6.1.1. C
ONFIGURATION ACTIVATION FOR
500
MODELS
Press the ENTER ,
↑
and CLEAR keys at the same time. The following will appear on the display:
ENTER PASSWORD:
In order to access the procedure you need to enter the password
2501
which protects against
unauthorised accesses and press the ENTER key in order to confirm. To enter the password, the
displayed value may be increased or reduced by using the
↑
and
↓
keys, whereas with the +/- GOAL
keys, it is possible to scroll the numbers and change them individually.
At this point two choices are offered:
↑
= Tech Config
↓
= Troubleshooting
Press the numerical
↓
key to enter the technical parameter configuration menu , and the equipment
will start to show you on the display the current configuration structure as detailed later on.
6.1.2. C
ONFIGURATION ACTIVATION FOR
700
MODELS
The configuration procedure for the equipment is activated when the equipment is in Stand-By.
Press the
369
keys at the same time and the Display will show:
ENTER PASSWORD:
In order to access the procedure you need to enter the password
2501
which protects against
unauthorised accesses and press the ENTER key in order to confirm. At this point two choices are
offered:
1 = Tech Config
2 = Troubleshooting
Press the numerical key
2 to enter the Troubleshooting menu and the equipment will start to display
the current configuration structure as detailed later on.