Technogym New Bike EXCITE Plus, Техническое обслуживание руководство

Страница: 186 / 237

- New Bike: Technical service guide - rev. 4.1
Page 7.64
7.22. DISMANTLING THE INPUT MODULE
For 500, 700 and 700VISIO/VISIOWEB versions
Figure 7.22-1
1. To gain access to the connectors, turn the
equipment on its side.
2.
Unscrew the 2 screws (a) using a medium-
sized Phillips screwdriver and remove the
input module on the front platform.
3.
Disconnect the connector of the cable which
goes up to the Brake Board, from its support
(b) .
To re-fit the connectors, follow the above
operations in reverse.
For 500SP and 700SP versions.
Figure 7.22-2
1. To gain access to the input connector of the
battery charger, turn the equipment on its
side.
2. Remove the input module for the battery
charger
(c) on the front platform.
To re-fit the connectors, follow the above
operations in reverse.