Technogym New Bike EXCITE Plus, Техническое обслуживание руководство

Страница: 132 / 237

- New Bike: Technical service guide - rev. 4.1
Page 7.10
7.3.2.1. Wireless Board (A)
Figure 7.3-5
1. Disconnect the 2 aerial connectors on the
wireless board highlighted in the figure.
WARNING: Be extremely careful with
the wireless aerial cables and their
connectors as they are particularly
delicate. In addition, if you need to
dismantle, it is important to follow the
route of the cables indicated in Figure
7.3-8.
Figure 7.3-6
2. Widen the two catches in the direction of the
purple arrows
(1) so as to be able to lift the
Board.
Figure 7.3-7
3. Remove the Wireless Board (A) in the
direction of the orange arrow (2) , as shown in
the figure at the side.
WARNING: During re-assembly, you
must re-fit the aerials in Figure 7.3-5
onto the Wireless Board and then fit the
board back into its seat so as to avoid
pressing onto the CPU circuits.
In order to re-fit the Wireless Board,
carry out the above operations in reverse.
Continues on the next page...