Technogym New Bike EXCITE Plus, Техническое обслуживание руководство

Страница: 119 / 237

- New Bike: Technical service guide - rev. 4.1
Page 6.45
6.16.2. H
AND
S
ENSOR
BODY CONTINUITY: It is statistically recognized that it is difficult (if not impossible)
to measure the HR of certain people using a Hand Sensor. This may be caused by a
number of reasons which may affect the effectiveness of the "electric" contact between
the skin of the user and the HS electrodes, such as: freshly-washed or particularly dry
hands, particular acidity level of the skin and/or particular body fat index. For these
persons one should use a Heart Rate Band.
CORRECT USE OF HAND SENSOR: Grasp both the top and bottom plate without
doing so too tightly and avoid washing your hands aggressively so as to avoid particular
dryness.
NO
Receiver Board
defective.
Replace.
THE TELEMETRIC HR
SIGNAL IS INCORRECT
(Hand Sensor)
Set the priority on the
Hand Sensor.
Problem solved?
Check the state of
wear of Hand Sensor cable.
Problem solved?
OK
OK
NO
2
OK
NO
YES
Check the Display SW
versione and the grounding of
the Receiver Board.
3
YES
YES
1
NO