cont.
BIKE MED
software
BIKE MED software
Profile workout
The programming of the exercise is now complete. A beep sounds to signal that you can start
the workout.
During the exercise the profile LED columns are all lit to show the programmed route: in
constant power profiles, the height of the LED columns is proportional to the effort level;
in constant heart rate profiles, the height of the LED columns is proportional to the target
heart rate. The column for the current step blinks.
The goal value is shown in the goal dial as it increases; the goal arc lights up proportionally
from left to right until the entire set value has expired.
The following keys are enabled:
-
the STOP and PAUSE keys
-
the effort level edit keys; the change affects the parameters of the whole profile and not
just the individual step
-
the goal value edit keys; the change affects the parameters of the whole profile and not
just the individual step
At the end of the exercise the effort level decreases for the cool down.
Description of the control panel
QUICK START workout
Cool down
Workouts with Goals:
The tests
TRAINING ZONE workout
WEIGHT LOSS workout
Profile workout
Workouts with the TGS key
Performance index
Configuration menu
Other control panel messages
Glossary