58
cont.
BIKE MED
software
BIKE MED software
Profile workout
level (1-12) = 10
Type in the effort level (based on the test result) with the number keys, then press ENTER to
confirm and proceed.
D
anger
You are advised not to do the exercise at a higher effort level than that indicated
by the level test.
Always check that the heart rate is no greater than 90% of the maximum rate
(for the calculation, see the
Monitoring the Heart Rate
section in the equipment
User Manual; for the display, see above the
Description of the control panel
section).
The programming of the exercise is now complete. A beep sounds to signal that you can start
the workout.
During the exercise the profile LED columns are all lit to show the programmed route: the
height of the LED columns is proportional to the effort level; the column for the current
step blinks.
The goal value is shown in the goal dial as it increases; the goal arc lights up proportionally
from left to right until the entire set value has expired.
Description of the control panel
QUICK START workout
Cool down
Workouts with Goals:
The tests
TRAINING ZONE workout
WEIGHT LOSS workout
Profile workout
Workouts with the TGS key
Performance index
Configuration menu
Other control panel messages
Glossary