0
cont.
BIKE MED
software
BIKE MED software
The tests
Custom maximal test
The maximal test is for very fit users.
In the custom maximal test the loads are set by the user:
starting power= watts 120
Type in the test starting power with the number keys, then press ENTER to confirm and
proceed.
power increase= watts 10
Type in how much the load must increase between one step and the next with the number
keys; then press ENTER to confirm and proceed.
single step time (mm:ss)= 00:50
Type in the time, in minutes and seconds, for each step, with the number keys, then press
ENTER to confirm and proceed.
There is no specific warm up stage; therefore you are advised to set the first step or steps
with appropriate loads or to warm up for a few minutes before the test.
During the test only the STOP key is enabled, for ending the test.
Description of the control panel
QUICK START workout
Cool down
Workouts with Goals:
The tests
TRAINING ZONE workout
WEIGHT LOSS workout
Profile workout
Workouts with the TGS key
Performance index
Configuration menu
Other control panel messages
Glossary