cont.
BIKE MED
software
BIKE MED software
Cool down
At the end of each workout there is a cool down stage, at half the effort level of the exercise
just completed.
For workouts lasting less than a minute, on the other hand, at the end of the exercise the
equipment goes straight into standby.
During the cool down, the only key enabled is the
one for going into standby.
The profile LED columns are blocked, showing the gradient for the exercise just ended.
Everything switches off in the goal arc; the goal dial will either show the total time of the
exercise just ended, the total distance covered or the total calories burned.
The workout results alternate on the alphanumeric display:
average H.R. = 120 bpm
-
if the heart rate monitor has been used for at least minutes during the exercise
P.I. = 10
-
if the heart rate monitor has been used for at least minutes during the exercise
average speed = 115 rpm
-
in workouts at constant speed
average power = 350 watts
Description of the control panel
QUICK START workout
Cool down
The tests
TRAINING ZONE workout
WEIGHT LOSS workout
Profile workout
Workouts with the TGS key
Performance index
Configuration menu
Other control panel messages
Glossary