Technogel MIXTRONIC 110, Инструкция по установке, использованию и техническому обслуживанию

Страница: 22 / 66

22
⇒
Heating cycle
Before starting up the machine and beginning
heating , the cycle that the machine is to carry out must be set;
please follow these steps:
I° - Set heating temperature
II° - Set whether the mixture requires emulsifying
III° - Select whether the whole or half the tub is to be heat
After programming the machine heating can be started.
A USEFUL EXAMPLE:
Quantity of mixture to be heat = 60 litres (MIXTRONIC 60)
- Chosen heating temperature = +85°C
- Mixture to be emulsified ? = YES
- Quantity of mixture to be heat = 110 litres (MIXTRONIC 110)
- Chosen heating temperature = +85°C
- Mixture to be emulsified ? = YES
PROGRAMME :
I° II° III°
Lights (led) off
If on, press the money box
and it will switch off.
Now that you have programmed the cycle , pour the liquid into machine
and start by pressing the START CYCLE push button.
While operating, please press the MANUAL push button when you start pouring in solids (powdered milk -
sugar - etc.), so as to accelerate dispersion,: the emulsioner will start and will operate for roughly 2 minutes
before stopping. If 2 minutes is not enough, please press the push button again.