technoac TDR-TA3.3T, Руководство пользователя

Страница: 15 / 25

Cable fault locator
TDR-TA3.3T
________________________________________________________________________
________________________________________________________________________
15

the distance (m) from the probe pulse to the cursor;

the length of probe pulse (title
– Pulse);

the selected measurement subrange (window) (title
– Window);

the selected gain factor (from 0 to 155 conv. units) (title
– Gain);

the selected offset value (from -48 to +48 conv. units) (title
– Offset);

the selected coefficient of shortening (title
– C.S.)
The right part (top down):

the device input status indicator (symbol - );

the indicator of setting the cursor from current position to zero distance (symbol -
).
5 Safety measures
5.1 Only users acquainted with the given Manual are allowed to operate TDR-TA3.3T
5.2 The TDR-TA3.3T has no life-threatening voltage
5.3 The staff operating on different tracks is obliged to follow the safety rules of each
track.
6 Usage preparation and operation
6.1 Pre-exploitation check
The TDR-TA3.3T should be visually checked before use. Special attention to be
payed to the control tools (keyboard, grips) marking and absence of visible damage.
The attention should be payed to the appropriate number of batteries and their
correct installation. The battery discharge status is controlled by the indicator in
MEASUREMENT mode.
6.2 Switching on the device
The devise should be switched on by pressing the ON/OFF button. This action
activates the window with the
manufacturer’s contact data. This window changes to a
display in a MEASUREMENT mode.
6.3 Device connection to the researched line