technoac Success AG-511N, Техническое описание, инструкция по эксплуатации

Страница: 8 / 29

8
Change of the volume in headphones level does not affect the input level.
- The mode «Pause» . When pressing the «Pause» button, any audio indication stops and
in pressing the light emitting diode indicator displays input level measured at the moment
of the «Pause» button pressing. The exit from the mode is being carried by a repeat press
of the button.
Mode «Stop / Pause» is recommended to use with the acoustic sensor to mute
the sound in headphones in order to eliminate noise that occur when moving and
installing the sensor.
3. Electromagnetic sensor EMD-247
The set uses electromagnetic sensors «EMD-247» on the basis of resonance ferrite magnetic
antenna. Resonance frequencies of the antenna: 50 Hz, 100 Hz, 512 Hz, 1024 Hz , 8192 Hz and
32768 kHz. Switching of resonance is forced (controlled by the receiver).
Lock nut rod
Locking antenna nut
Rod
The EMD Rod for easy transportation is sliding. Antenna of the electricitymagnetic sensor can take
three positions relative to the boom: at 0 0 , 45 0 , 90 0 degrees.
To bring the electromagnetic sensor from the vehicle into working position, it’s necessary: to
loosen the lock nut rod, to slide the rod to the desired length and to fix the locking nut.
To change the electromagnetic antenna position relative to the rod, it’s necessary to loosen the
fixing nut, mount the antenna to the desired position, to fix the position by the locking nut
Antenna electromagnetic