ACCESS/A A711 L-Series Installation & Operating Instructions 09RE416
Technisonic Industries ltd. Copyright 1996, 1997, 2010, 2011 BY TiL ALL RIGHTS RESERVED Page 2-26
Side Lighting/CST/Aux Adjustments
Adjustment Name
Location
Procedure/purpose
Notes
ICS Low Cut
R/H Side
Sets low frequency cut-off (BASS)
of ICS audio. Useful for removing
very high levels of cabin low
frequency noise on the intercom.
Not normally a field setting.
CST/MUSIC/AUX
Hi Cut
R/H Side
Sets high frequency cut-off
(TREBLE) of CST/MUSIC/AUX
audio.
Preset, set to desired level,
if required.
CST/MUSIC/AUX
Low Cut
R/H Side
Sets low frequency cut-off (BASS)
of CST/MUSIC/AUX audio.
Preset, set to desired level,
if required
CST/MUSIC/AUX
Mute Depth
R/H Side
Sets muting level of
CST/MUSIC/AUX
audio during ICS or TX operations.
May be muted completely OFF, or
set to a lower level during these
operations.
Preset to OFF, Set to other
desired level, if required
CST/MUSIC/AUX
Volume
R/H Side
Sets sensitivity of the
CST/MUSIC/AUX audio input
channels. Note that this input is
NOT set by the front panel RX
control, but IS controlled by the
dedicated CST/MUSIC/AUX level
control.
Preset, Set to desired level,
if required for specific
system. Do not make too
sensitive, or noise floor will
suffer
Backlight Dimming
R/H Side
Allows dynamic range and
maximum brightness of the front
panel backlight intensity to be set.
Adjust panel dimmer and
set to suit.
Backlight Intensity
Range
R/H Side
Allows large adjustment of front
panel backlight intensity to be set,
100% is normal for regular lighting,
50% is normal for NVG panels.
Normally preset depending
on backlight type, but can
be field changed.
TX Indicator Brightness
R/H Side
This controls the intensity shift level
if all green TX annunciation is
jumper selected (NVG default), has
no effect with normal mode lighting.
Preset, set to desired level,
if required. Adjust for
desired annunciator
intensity change during
transmit.
