ACCESS/A A711 L-Series Installation & Operating Instructions 09RE416
Technisonic Industries ltd. Copyright 1996, 1997, 2010, 2011 BY TiL ALL RIGHTS RESERVED Page 2-28
Unit modifications that can be set in the field during installation:
Internal, removable jumpers may be set for the following items (DEFAULT is BOLD):
Main RX Board
PILOT HEADSET Impedance:
150/600 or 8/20 ohms
SPEAKER AUDIO:
RX Audio
ON/OFF
CST/MUSIC/AUX (TAPE) Audio ON/OFF
HEADSET AUDIO:
CST/MUSIC/AUX (TAPE) Audio ON/OFF
RX VOL MIIN:
Set to 5% or Set to 0%
CST/NAV/MUSIC Function
Jumpered CST
Internal, removable jumpers may be set for the following items (DEFAULT is BOLD):
Mic Processor Board
PAL OPT 1:
Jumpered
PAL OPT 2:
Jumpered
OPT 3 (Pil. TX Muting)
Jumpered
Internal, removable jumpers may be set for the following items (DEFAULT is BOLD):
Main TX Board
Backlight Range 50/100%
Jumpered 100%
TX Annunciator RED/GREEN Jumpered RED (Green for NVG)
Internal, removable jumpers may be set for the following items (DEFAULT is BOLD):
POT Board
PA Audio Tick (ON/OFF)
Jumpered OFF
Refer to the Service Manual for locations and further details.
